Select Page

PTM-72-1000-F, 1000 N.m, Forward, Stall, 3/4″

PTM-72-1000-F FWD ONLY 3/4″ SQ. DR.


PTM-72 tools use the same 'twin motor' handle as the PTM-52 but fitted with a durable 72mm gearbox to allow higher torque outputs. The 'twin motor' concept gives the benefit of high run-down speeds while adding very little to the size and weight of the tool.


Additional information

Weight 204.59 oz
  • Quiet : Noise level : 84dB(A), with an uncertainty K = 3dB, when free-running
  • Non impacting - low vibration levels make these tools comfortable and safe to use.
  • Square drive is quickly and easily replaceable.
  • 'Soft Start' trigger controls / aids socket location and allows gradual and safe reaction location.
  • For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the operator.
  • Light weight - single direction 2000 N·m stall tool weighs just 6.2 kg.
  • On Bi-Directional tools, the direction control knob is locked while the tool is running to prevent accidental damage to the gearbox.
  • Fast - 1000 N·m version has a free speed of 140 rpm for rapid bolt run-down.
  • 1" square drive available for the 1000 N·m version, Part No. 18492.