Kraftform Kompakt VDE 17 extra slim 1

  • Individually tested VDE interchangeable blades with reduced blade diameters
  • 2 multi-component, ergonomic Kraftform VDE hand-holders with anti-roll protection
  • In a robust textile box
  • Multifunctional pliers for electrical installation: cable cutting, stripping, gripping, bending, deburring, crimping of wire end ferrules
  • Pliers including cable shears with precision cutting edges (inductively hardened) for Cu and Al cables up to 5 x 2.5mm² / Ø 15 mm

14 VDE interchangeable blades (each 154 mm long) with reduced blade diameter (articles KK 60 i 0,4x2,5 and KK 67 i TX 10 conventional diameter), so that sunken screws and spring elements can be accessed and actuated. Two 817 VDE blade-holding handles for Wera VDE interchangeable blades; Kraftform handle for ergonomic work; in robust belt pouch. Individually tested tools as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V. One pair of Knipex VDE 13 96 200 electrical installation pliers; the pliers replace up to 6 individual tools for electrical installation: cutting, stripping, gripping, bending, deburring and crimping - all in one tool. With pawl for gentle gripping. Chrome-plated for better rust protection, with insulated multi-component grip sheaths. - Buy/Remember 05136027001 1

  • 05003990001 2x 9x102 mm
  • 05003413001 1x PH 1x154 mm
  • 05003414001 1x PH 2x154 mm
  • 05003455001 1x PZ 1x154 mm
  • 05003456001 1x PZ 2x154 mm
  • 05003447001 1x # 1x154 mm
  • 05003448001 1x # 2x154 mm
  • 050
    3431001 1x TX 10x154 mm
  • 05003437001 1x TX 15x154 mm
  • 05003438001 1x TX 20x154 mm
  • 05003439001 1x TX 25x154 mm
  • 05003400001 1x 0.4x2.5x154 mm
  • 05003406001 1x 0.6x3.5x154 mm
  • 05003407001 1x 0.8x4x154 mm
  • 05003408001 1x 1x5.5x154 mm
  •   1x
  •   1x 70x50 mm

Additional information

Weight 2 oz
Dimensions 6 × 1 × 1 in

Taking out the blade

Taking out the blade

By pulling and holding down the clamping sleeve the interchangeable screwdriver blade, or the switch cabinet key, is unlocked and can easily be taken out of the handle. Kraftform

Kraftform

The basic idea for the prototype of the Kraftform handle – that the hand should dictate the design – has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either.

  • Individually tested VDE interchangeable blades with reduced blade diameters
  • 2 multi-component, ergonomic Kraftform VDE hand-holders with anti-roll protection
  • In a robust textile box
  • Multifunctional pliers for electrical installation: cable cutting, stripping, gripping, bending, deburring, crimping of wire end ferrules
  • Pliers including cable shears with precision cutting edges (inductively hardened) for Cu and Al cables up to 5 x 2.5mm² / Ø 15 mm

Handle/interchangeable blade system – Kraftform Kompakt VDE

Individually tested

Individually tested

Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts.

Kraftform Kompakt VDE

Kraftform Kompakt VDE

The system "one handle – many interchangeable blades" makes Kraftform Kompakt VDE compact screwdriving sets for in-house as well as mobile electrical applications out of the sets. The belt pouch is practical for tidy storage and transportation. Also available with electrical cabinet keys conforming to the industrial standards.