Kraftform Kompakt VDE 15 Torque 1.2-3.0 Nm extra slim 1
- Kraftform Kompakt VDE torque screwdriver set with adjustable torque
- Adjustable Kraftform VDE torque holder exclusively for Wera VDE interchangeable blades
- VDE interchangeable blades 154 mm long
- In robust pouch
- 15-piece
15-piece torque VDE interchangeable blade set. Includes 14 blades (12 of which with a reduced diameter) with integrated insulation protection. Torque VDE holder with adjustable torque from 1.2-3.0 Nm. Kraftform Plus handle: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
-
Buy/Remember
05059291001
1
- 05074750001
1x art. no. 7441 VDEx1.2-3.0 N m
- 05003413001
1x PH 1x154 mm - 05003414001
1x PH 2x154 mm
- 05003455001
1x PZ 1x154 mm - 05003456001
1x PZ 2x154 mm
- 05003447001
1x # 1x154 mm - 05003448001
1x # 2x154 mm
- 05003431001
1x TX 10x154 mm
- 05003437001
1x TX 15x154 mm - 05003438001
1x TX 20x154 mm - 05003439001
1x TX 25x154 mm
- 05003400001
1x 0.4x2.5x154 mm
- 05003406001
1x 0.6x3.5x154 mm - 05003407001
1x 0.8x4x154 mm - 05003408001
1x 1x5.5x154 mm
Additional information
Weight | 2 oz |
---|---|
Dimensions | 6 × 1 × 1 in |
Inserting the blade
According to the job, the insulated inter-changeable blade with the required tipstyle, or a switch cabinet key is inserted into the clamping mechanism.
Taking out the blade
By pulling and holding down the clamping sleeve the interchangeable screwdriver blade, or the switch cabinet key, is unlocked and can easily be taken out of the handle.
- Kraftform Kompakt VDE torque screwdriver set with adjustable torque
- Adjustable Kraftform VDE torque holder exclusively for Wera VDE interchangeable blades
- VDE interchangeable blades 154 mm long
- In robust pouch
- 15-piece
Kraftform adjustable torque handle for Electricians
Individually tested
Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts.
Handle/interchangeable blade system – Kraftform Kompakt VDE
The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications.
Kraftform adjustable torque handle for Electricians
Easy-to-read scale value. Measurement accuracy is ± 6 % in accordance with the standard EN ISO 6789.
Kraftform adjustable torque handle for Electricians
Simple setting of the required torque by hand.
Excess-load signal
Distinctly audible and noticeable excess-load signal when the pre-set torque is reached.