160 iSS/7 screwdriver set Kraftform Plus Series 100. With reduced blade diameters and smaller handle diameters

  • Kraftform screwdrivers with reduced blade diameter as well as partially with slim handle design
  • Allows screwdriving even in confined situations
  • Kraftform handle for fast and ergonomic screwdriving
  • Low-lying screw and spring elements can be reached and actuated
  • Safe work at a voltage of 1,000 volts, individually tested

7 Wera VDE iSS screwdrivers with reduced shaft diameter as well as partially slimmer handle design to enable work in confined working situations and to allow low-lying screw and spring elements to be reached and actuated; individually tested tools as per IEC 60900; individual testing in a water bath at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. "Take it easy" Tool Finder: colour coding according to profile and size. The anti-roll feature prevents any bothersome rolling away at the workplace. - Buy/Remember 05135961001 1

  • 05020129001 1x 0.8x4x100 mm
  • 05006442001 1x 1x5.5x125 mm
  • 05006440001 1x 0.6x3.5x100 mm
  • 05020131001 1x PH 1x80 mm
  • 05020133001 1x PH 2x100 mm
  • 05020132001 1x # 1x80 mm
  • 05020134001 1x # 2x100 mm

Additional information

Weight 2 oz
Dimensions 6 × 1 × 1 in

“Take it easy” Tool Finder

“Take it easy” Tool Finder

Screwdrivers with "Take it easy" tool finder: colour coding according to profile and size stamp.

Non-roll feature

Non-roll feature

The hexagonal non-roll feature prevents any rolling away at the workplace.

160 iSS/7 screwdriver set Kraftform Plus Series 100. With reduced blade diameters and smaller handle diameters

  • Kraftform screwdrivers with reduced blade diameter as well as partially with slim handle design
  • Allows screwdriving even in confined situations
  • Kraftform handle for fast and ergonomic screwdriving
  • Low-lying screw and spring elements can be reached and actuated
  • Safe work at a voltage of 1,000 volts, individually tested

The super slim screwdrivers for Electricians

The super slim screwdrivers for Electricians

The super slim screwdrivers for installation jobs in particularly confined spaces. Not only do the blades have a reduced diameter, the handles also have a very slim design.

VDE-insulated screwdriver with reduced blade diameter

VDE-insulated screwdriver with reduced blade diameter

Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900.

Individually tested

Individually tested

Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts.

Impact strength test

Impact strength test

Impact strength tested at −40°C, guaranteeing safety even under extreme conditions.

Multicomponent Kraftform handle

Multicomponent Kraftform handle

Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces – resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible.

Prevents hand injuries

Prevents hand injuries

The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses.