160 iS/7 Rack screwdriver set Kraftform Plus Series 100, voltage tester and rack. With reduced blade diameter

  • Insulated blades for secure work at 1,000 volts
  • Smooth hard zones for high speed turning, soft grip zones for high torque transfer
  • Take it easy tool finder: colour coding according to profile and size
  • Hexagonal anti-roll feature against rolling away
  • Reduced shaft diameter

7-piece screwdriver set with reduced shaft diameter and integrated insulation protection so that even low-lying screw and spring elements can be accessed and actuated. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. "Take it easy" Tool Finder: colour coding according to profile and size. The anti-roll feature prevents any bothersome rolling away at the workplace. Including voltage tester and 1 rack for storage.

-

Buy/Remember

05006480001

1

  • 05006450001
    1x PH 1x80 mm
  • 05006451001
    1x PH 2x100 mm
  • 05006466001
    1x # 2x100 mm
  • 05006440001
    1x 0.6x3.5x100 mm
  • 05006441001
    1x 0.8x4x100 mm
  • 05006442001
    1x 1x5.5x125 mm
  • 05005655001
    1x 0.5x3x70 mm

Product not available in the USA and Canada.

Additional information

Weight 2 oz
Dimensions 6 × 1 × 1 in

Prevents hand injuries

Prevents hand injuries

The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses.

“Take it easy” Tool Finder

“Take it easy” Tool Finder

Screwdrivers with "Take it easy" tool finder: colour coding according to profile and size stamp.

160 iS/7 Rack screwdriver set Kraftform Plus Series 100, voltage tester and rack. With reduced blade diameter

  • Insulated blades for secure work at 1,000 volts
  • Smooth hard zones for high speed turning, soft grip zones for high torque transfer
  • Take it easy tool finder: colour coding according to profile and size
  • Hexagonal anti-roll feature against rolling away
  • Reduced shaft diameter

Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts.

VDE-insulated screwdriver with reduced blade diameter

VDE-insulated screwdriver with reduced blade diameter

Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900.

PlusMinus screwdrivers

PlusMinus screwdrivers

For the use in terminal blocks, control cabinets, switches, relays, sockets etc.

Individually tested

Individually tested

Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts.

Impact strength test

Impact strength test

Impact strength tested at −40°C, guaranteeing safety even under extreme conditions.

Multicomponent Kraftform handle

Multicomponent Kraftform handle

Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces – resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible.